Engine Oil Additives
PRO-TEC Engine Flush
A special formula that cleans the internal parts of the engine from residues and mud of burnt oil, and smoke from the cylinder and pistons.
Contains lubricant components that protect the machine from increased wear during cleaning.Improves engine performance, reduces fuel consumption and burning oil, allowing better piston operation. It helps to reduce the damage of the engine since it allows for better circulation of the oil inside the engine, especially at start-up.It is added to the engine oil just before changing it. It is recommended to replace the oil filter after Engine Flush.
PRO-TEC Engine Oil Stop Leak
The combination of highly efficient and innovative components regenerates plastic and rubber seals in the oil circuit and keeps it soft.
The oil loss through seals or piston rings is reduced or stopped, which reduces the oil consumption. In addition, abrasion and wear will be considerably reduced, the viscosity of the oil is kept stable and works against the oxidation of the engine oil.
The usable lifetime of the engine will be extended. Suitable for mineral and synthetic oils.
PRO-TEC Hydraulic Lifter Care
Hydraulic valves are based on oil pressure for self-regulation. Because of the low speed of oil flow into the glasses, residues accumulate in the flow of oil.
Hydraulic Lifter Care cleans the valves of the hydraulic valves, helping to eliminate the noise from the valves. It guarantees the maximum efficiency of the valves and helps to improve the operation of the engine.
Suitable for petrol and oil engines. It is added to the oil after it is changed.
PRO-TEC Nano Engine Protect & Seal
High-performance technology for optimal protection for your machine against damage to its internal parts.
Reduces wear by creating a protection shield based on dwarf technology. Improves engine efficiency by reducing friction and increasing fuel economy. Suitable for gasoline and petroleum engines, as well as for improved efficiency in manual gearboxes and drive shafts.
Additionally, it acts as a refresher for jaws and choppers, preventing oil leaks and eliminating existing leaks. Improves engine start-up, especially during cold mornings, and reduces operating noise.
Add up to 5 liters of oil to the new oil. For gearboxes and drive shafts, add 1:10.
PRO-TEC Oil Booster
Improves lubrication by significantly reducing wear and friction between moving parts. Reduces oil and fuel consumption, as well as component noise, by lowering the operating temperature. Improves internal friction and oil temperature. Renews the sealing gaskets and seals. It optimally protects against rust and corrosion by prolonging the life of the components and ensuring greater ease of operation. Inactivates harmful acids.
Add it to the new oil after each oil change. The 375 ml is enough for up to 8lt of oil.
PRO-TEC Oil Anti-Smoke
Innovative design that greatly reduces the smoke and its formation from all gasoline engines, diesel engines & LPG (gas).Ideal for cars with high oil consumption. Ensures ideal lubrication for all moving parts. Its high viscosity prevents the oil from entering the combustion chambers. It offers clean & strong combustion with minimal puffiness.
Add to the lubrication system. Compatible with all commercial oils. For best results, we recommend cleaning the oil system with Pro-Tec Engine Flush before using the product. The 375 ml is sufficient for about 5 - 6 liters of oil.
Engine Oil Additives
PRO-TEC Engine Flush
A special formula that cleans the internal parts of the engine from residues and mud of burnt oil, and smoke from the cylinder and pistons.
Contains lubricant components that protect the machine from increased wear during cleaning.Improves engine performance, reduces fuel consumption and burning oil, allowing better piston operation. It helps to reduce the damage of the engine since it allows for better circulation of the oil inside the engine, especially at start-up.It is added to the engine oil just before changing it. It is recommended to replace the oil filter after Engine Flush.
PRO-TEC Engine Oil Stop Leak
The combination of highly efficient and innovative components regenerates plastic and rubber seals in the oil circuit and keeps it soft.
The oil loss through seals or piston rings is reduced or stopped, which reduces the oil consumption. In addition, abrasion and wear will be considerably reduced, the viscosity of the oil is kept stable and works against the oxidation of the engine oil.
The usable lifetime of the engine will be extended. Suitable for mineral and synthetic oils.
PRO-TEC Hydraulic Lifter Care
Hydraulic valves are based on oil pressure for self-regulation. Because of the low speed of oil flow into the glasses, residues accumulate in the flow of oil.
Hydraulic Lifter Care cleans the valves of the hydraulic valves, helping to eliminate the noise from the valves. It guarantees the maximum efficiency of the valves and helps to improve the operation of the engine.
Suitable for petrol and oil engines. It is added to the oil after it is changed.
PRO-TEC Nano Engine Protect & Seal
High-performance technology for optimal protection for your machine against damage to its internal parts.
Reduces wear by creating a protection shield based on dwarf technology. Improves engine efficiency by reducing friction and increasing fuel economy. Suitable for gasoline and petroleum engines, as well as for improved efficiency in manual gearboxes and drive shafts.
Additionally, it acts as a refresher for jaws and choppers, preventing oil leaks and eliminating existing leaks. Improves engine start-up, especially during cold mornings, and reduces operating noise.
Add up to 5 liters of oil to the new oil. For gearboxes and drive shafts, add 1:10.
PRO-TEC Oil Booster
Improves lubrication by significantly reducing wear and friction between moving parts. Reduces oil and fuel consumption, as well as component noise, by lowering the operating temperature. Improves internal friction and oil temperature. Renews the sealing gaskets and seals. It optimally protects against rust and corrosion by prolonging the life of the components and ensuring greater ease of operation. Inactivates harmful acids.
Add it to the new oil after each oil change. The 375 ml is enough for up to 8lt of oil.
PRO-TEC Oil Anti-Smoke
Innovative design that greatly reduces the smoke and its formation from all gasoline engines, diesel engines & LPG (gas).Ideal for cars with high oil consumption. Ensures ideal lubrication for all moving parts. Its high viscosity prevents the oil from entering the combustion chambers. It offers clean & strong combustion with minimal puffiness.
Add to the lubrication system. Compatible with all commercial oils. For best results, we recommend cleaning the oil system with Pro-Tec Engine Flush before using the product. The 375 ml is sufficient for about 5 - 6 liters of oil.