Industrial Lubricants
CEPSA Engranages HP
Industrial lubricants for gearboxes working with high loads combined with vibration, high pressure and slippage.Excellent lubrication and protection against wear and tear. Their composition has high thermal and chemical stability and provides antioxidant and anti-rust protection of metals. Anti-foaming properties and good separation from water.Suitable for both dipping and lubrication with oil spraying systems. They are especially recommended for the cement and metallurgy industries.
Specifications AIST 224, AGMA 9005-E02 (EP), DIN 51517 Parte 3, DAVID BROWN S1.53.101 TYPE 3, CINCINNATI MACHINE P-74, MÜLLER WEINGARTEN
ISO Fluctuations : 68, 100, 150, 220, 320, 460, 680, 1000
CEPSA Engranages HPS
100% synthetic lubricant for industrial use in highly demanding applications and temperatures between -35º C and 200º C. Designed for lubrication of closed lubrication circuits (industrial gear units), endless gearmotors, ball bearings and ball bearings and any machine requiring high pressure lubrication (EP). Particularly suitable for the paper and plastic industry where temperatures exceed 150 ° C
Specifications U.S STEEL 224, AGMA 250.04, DIN 51517 Part 3, ISO 129525-1 Type CKC
ISO Fluctuations : 150, 220, 320, 460
CEPSA Engranages HPX
Synthetic high performance industrial lubricant with high viscosity index and low melting point. It prevents the formation of varnish and oil and tar stocks. Its careful composition does not oxidize or affect copper parts.Recommended for multiple applications with high loads and high speeds. It retains its properties in a wide range of temperatures, even very high temperatures where an ordinary lubricant would oxidize very quickly. That's why it reduces the use of lubricant, expanding oil changes. Particularly suited to the metallurgical industry where high loads, vibrations and interruptions are combined with machine speeds. It can be used in the place of simple lubricants for better lubrication and long oil replacement intervals.
Specifications AIST 224, AGMA 9005 – E-02 (EP), DIN 51517 Part 3 CLP, ISO 129525-1 Type CKC
Fluctuations: ISO: 68, 100, 150, 220, 320, 460, 680
CEPSA Engranages XMP
A very high quality, extreme pressure lubricant oil, with sulphur-phosphorus additives, which has been developed for all types of industrial steel gearing in sealed gearboxes.
Applications
o Especially recommended for all types of industrial steel gearing in sealed gearboxes, operating under severe service conditions and subject to high shock loads, or large constant or intermittent forces, including those that operate at very high loads and speeds.
o Its excellent extreme pressure properties make it essential for certain, heavily loaded reducers at low speeds, where there is a risk of “MICROPITTING”.
Specifications DIN 51517 Part 3 HLP, ISO 12925-1 type CKC / CKD, AGMA 9005-F16 AntiScuff, SAE 224, DAVID BROWN S1.53.101 Type E, FIVES CINCINNATI P-Specs, MÜLLER WEINGARTEN, SIEMENS FLENDER AG Rev. 13
CEPSA Aerogear
High quality lubricants specially designed for use in gear units that are exposed to high loads and temperatures and where there is the possibility of water and dust entering the lubricant. Prevents damage to components caused by micropitting. It is especially recommended for use in wind turbines.
Specifications U.S.STEEL 224, DIN 51517 Parte 3, FLENDER AG, AGMA 9005-E-02 (EP), DAVID BROWN 51.53.101 Type E, CINCINNATI MACHINE P-74, SEB 181.226, MÜLLER WEINGARTEN
ISO Fluctuations: 150, 220, 320, 460
CEPSA Aerogear Synt
100% synthetic lubricant for all types of industrial gearboxes that work with high loads, even at high speeds. Due to its synthetic formula, it allows larger oil changes and provides greater protection against oxidation. Its excellent high pressure (EP) properties make it ideal for high-load applications at very low speeds where there is a risk of micropitting and especially wind turbines.
Specifications AIST 224, DIN 51517 Parte 3 (CLP), FLENDER AG, AGMA 9005-E02 (EP), CINCINNATI MACHINE P-74, DAVID BROWN S1.53.101 Type E
ISO Fluids: 220, 320, 460
CEPSA HD Turbinas
From paraffin bases suitably treated and enriched with selected chemical additives that give it excellent properties for multiple uses. Exclusive protection and lubrication for all parts of the gas turbine, has strong anti-aging properties, high chemical and thermal stability and rapid de-aeration. Special lubricants for steam or gas turbine engines and hydro turbines.
Specifications ISO 6743-5 L TSA/TSE/TGA/TGB/TGE, DIN 51515 Part I (L-TD), ASTM D 4304 (Type I), ALSTHOM NBA-P-50001-A, GENERAL ELECTRIC GEK 28143A, GENERAL ELECTRIC GEK 32568F, SIEMENS TLV 901304, SOLAR Class II
ISO Liquids : 32, 46, 68
CEPSA Turbinas EP
Special lubricants for the lubrication of steam turbines and hydro turbines, particularly in a generator or turbine engine with gearboxes and transmissions that require high quality high pressure hydraulic oil (EP).
Specifications ISO 6743-5 L TSA / TSE / TGA / TGB / TGE, ALSTOM HTGD 90117, GENERAL ELECTRIC GEK 101941A, GE GEK 107395A / GEK 27070 / GEK 28143B / GEK 46506D / GEK 32568F, SIEMENS TLV 901304, SOLAR ES 9224
ISO Liquids : 32, 46, 68
CEPSA Elekoil
Naphthenic base dielectric oil that retains its original properties for long periods of use. Special use as an insulator for large current transformers, switches, dimmers and generally on all electrical devices requiring insulating oil with dielectric power that lasts. It guarantees the required cooling and circulation, even at low temperatures, in weather-proof facilities.
Specifications: IEC 60296 (2003), group U Uninhibited
CEPSA Compressors AR
General purpose compressor lubricants with high oxidation resistance and excellent anti-rust properties. They achieve annihilation of residuals and deposits in the valves and compressor compartments with the highest temperatures, reducing maintenance requirements and lengthening the useful life of the machine. Effective protection of the sleeves and pistons from wear. They are recommended for compressors of single or double compression, piston (ISO 68 & 100) and rotary compressors (ISO 46), even in compressors working with inert gases.
Specifications: DIN 51506 TYPE VC-L & VD-L
CEPSA Compressors ARS
Compressor Lubricants 100% Polyalphaolefins-Based Polyester (PAO) Polymers for Greater Changes Compared to Oil-Based Lubricants. Lubricants with excellent thermal stability and very low evaporation. They have a very high viscosity index and a low friction index for higher performance. They prevent residue deposits and coal formation and are more resistant to oxidation of the oil. They protect the compressors from internal oxidation and rust. They are specially designed for rotary screw compressors and rotary screw type. Available in ISO 46, 68 and 100.
Specifications: DIN 51506 VC-L and VD-L . Manufacturer approvals such as COMPAIR , ATLAS COPCO, WORTHINGTON and HYDROVANE.
Industrial Lubricants
CEPSA Engranages HP
Industrial lubricants for gearboxes working with high loads combined with vibration, high pressure and slippage.Excellent lubrication and protection against wear and tear. Their composition has high thermal and chemical stability and provides antioxidant and anti-rust protection of metals. Anti-foaming properties and good separation from water.Suitable for both dipping and lubrication with oil spraying systems. They are especially recommended for the cement and metallurgy industries.
Specifications AIST 224, AGMA 9005-E02 (EP), DIN 51517 Parte 3, DAVID BROWN S1.53.101 TYPE 3, CINCINNATI MACHINE P-74, MÜLLER WEINGARTEN
ISO Fluctuations : 68, 100, 150, 220, 320, 460, 680, 1000
CEPSA Engranages HPS
100% synthetic lubricant for industrial use in highly demanding applications and temperatures between -35º C and 200º C. Designed for lubrication of closed lubrication circuits (industrial gear units), endless gearmotors, ball bearings and ball bearings and any machine requiring high pressure lubrication (EP). Particularly suitable for the paper and plastic industry where temperatures exceed 150 ° C
Specifications U.S STEEL 224, AGMA 250.04, DIN 51517 Part 3, ISO 129525-1 Type CKC
ISO Fluctuations : 150, 220, 320, 460
CEPSA Engranages HPX
Synthetic high performance industrial lubricant with high viscosity index and low melting point. It prevents the formation of varnish and oil and tar stocks. Its careful composition does not oxidize or affect copper parts.Recommended for multiple applications with high loads and high speeds. It retains its properties in a wide range of temperatures, even very high temperatures where an ordinary lubricant would oxidize very quickly. That's why it reduces the use of lubricant, expanding oil changes. Particularly suited to the metallurgical industry where high loads, vibrations and interruptions are combined with machine speeds. It can be used in the place of simple lubricants for better lubrication and long oil replacement intervals.
Specifications AIST 224, AGMA 9005 – E-02 (EP), DIN 51517 Part 3 CLP, ISO 129525-1 Type CKC
Fluctuations: ISO: 68, 100, 150, 220, 320, 460, 680
CEPSA Engranages XMP
A very high quality, extreme pressure lubricant oil, with sulphur-phosphorus additives, which has been developed for all types of industrial steel gearing in sealed gearboxes.
Applications
o Especially recommended for all types of industrial steel gearing in sealed gearboxes, operating under severe service conditions and subject to high shock loads, or large constant or intermittent forces, including those that operate at very high loads and speeds.
o Its excellent extreme pressure properties make it essential for certain, heavily loaded reducers at low speeds, where there is a risk of “MICROPITTING”.
Specifications DIN 51517 Part 3 HLP, ISO 12925-1 type CKC / CKD, AGMA 9005-F16 AntiScuff, SAE 224, DAVID BROWN S1.53.101 Type E, FIVES CINCINNATI P-Specs, MÜLLER WEINGARTEN, SIEMENS FLENDER AG Rev. 13
CEPSA Aerogear
High quality lubricants specially designed for use in gear units that are exposed to high loads and temperatures and where there is the possibility of water and dust entering the lubricant. Prevents damage to components caused by micropitting. It is especially recommended for use in wind turbines.
Specifications U.S.STEEL 224, DIN 51517 Parte 3, FLENDER AG, AGMA 9005-E-02 (EP), DAVID BROWN 51.53.101 Type E, CINCINNATI MACHINE P-74, SEB 181.226, MÜLLER WEINGARTEN
ISO Fluctuations: 150, 220, 320, 460
CEPSA Aerogear Synt
100% synthetic lubricant for all types of industrial gearboxes that work with high loads, even at high speeds. Due to its synthetic formula, it allows larger oil changes and provides greater protection against oxidation. Its excellent high pressure (EP) properties make it ideal for high-load applications at very low speeds where there is a risk of micropitting and especially wind turbines.
Specifications AIST 224, DIN 51517 Parte 3 (CLP), FLENDER AG, AGMA 9005-E02 (EP), CINCINNATI MACHINE P-74, DAVID BROWN S1.53.101 Type E
ISO Fluids: 220, 320, 460
CEPSA HD Turbinas
From paraffin bases suitably treated and enriched with selected chemical additives that give it excellent properties for multiple uses. Exclusive protection and lubrication for all parts of the gas turbine, has strong anti-aging properties, high chemical and thermal stability and rapid de-aeration. Special lubricants for steam or gas turbine engines and hydro turbines.
Specifications ISO 6743-5 L TSA/TSE/TGA/TGB/TGE, DIN 51515 Part I (L-TD), ASTM D 4304 (Type I), ALSTHOM NBA-P-50001-A, GENERAL ELECTRIC GEK 28143A, GENERAL ELECTRIC GEK 32568F, SIEMENS TLV 901304, SOLAR Class II
ISO Liquids : 32, 46, 68
CEPSA Turbinas EP
Special lubricants for the lubrication of steam turbines and hydro turbines, particularly in a generator or turbine engine with gearboxes and transmissions that require high quality high pressure hydraulic oil (EP).
Specifications ISO 6743-5 L TSA / TSE / TGA / TGB / TGE, ALSTOM HTGD 90117, GENERAL ELECTRIC GEK 101941A, GE GEK 107395A / GEK 27070 / GEK 28143B / GEK 46506D / GEK 32568F, SIEMENS TLV 901304, SOLAR ES 9224
ISO Liquids : 32, 46, 68
CEPSA Elekoil
Naphthenic base dielectric oil that retains its original properties for long periods of use. Special use as an insulator for large current transformers, switches, dimmers and generally on all electrical devices requiring insulating oil with dielectric power that lasts. It guarantees the required cooling and circulation, even at low temperatures, in weather-proof facilities.
Specifications: IEC 60296 (2003), group U Uninhibited
CEPSA Compressors AR
General purpose compressor lubricants with high oxidation resistance and excellent anti-rust properties. They achieve annihilation of residuals and deposits in the valves and compressor compartments with the highest temperatures, reducing maintenance requirements and lengthening the useful life of the machine. Effective protection of the sleeves and pistons from wear. They are recommended for compressors of single or double compression, piston (ISO 68 & 100) and rotary compressors (ISO 46), even in compressors working with inert gases.
Specifications: DIN 51506 TYPE VC-L & VD-L
CEPSA Compressors ARS
Compressor Lubricants 100% Polyalphaolefins-Based Polyester (PAO) Polymers for Greater Changes Compared to Oil-Based Lubricants. Lubricants with excellent thermal stability and very low evaporation. They have a very high viscosity index and a low friction index for higher performance. They prevent residue deposits and coal formation and are more resistant to oxidation of the oil. They protect the compressors from internal oxidation and rust. They are specially designed for rotary screw compressors and rotary screw type. Available in ISO 46, 68 and 100.
Specifications: DIN 51506 VC-L and VD-L . Manufacturer approvals such as COMPAIR , ATLAS COPCO, WORTHINGTON and HYDROVANE.